CCNA Enterprise (200-301)

CCNA Enterprise (200-301) course is offered by CAMIT. Equip you with the right technical know-how to make you industry-ready. Provides solutions for practical issues that a professional faces in his day-to-day work. Mentoring you with vertical expertise across multi-vendor platforms.

We are a group of experienced techies who have the passion to create new techies with a clear idea and in-depth knowledge in the latest technologies.

Syllabus:

• UNIT-1 NETWORK FUNDAMENTALS 
•     1. Introduction to the OSI Model
•     2. Introduction to IPv4 (Internet Protocol)
•     3. IPv4 Packet Header
•     4. Address Resolution Protocol (ARP)
•     5. Introduction to TCP and UDP
•     6. TCP Header
•     7. TCP Window Size Scaling
•     8. Introduction to ICMP
•     9. Introduction to DNS
•     10. Introduction to Cisco Command Line Interface (CLI)
•     11. User mode and Privileged mode   
• UNIT-2 NETWORK ACCESS
• VLANs and Trunks 
•     1. Introduction to VLANs
•     2. How to configure VLANs
•     3. VLAN Trunking Protocol (VTP)
•     4. Introduction to 802.1Q
•     5. How to configure a Trunk
•     6. Dynamic Trunking Protocol (DTP)
•     7. 802.1Q Native VLAN
•     8. Introduction to Voice VLAN
•     9. Etherchannels
•     10. L3 Etherchannel 
• Spanning-Tree 
•     1. Introduction to Spanning-Tree
•     2. Per VLAN Spanning-Tree
•     3. Spanning-Tree Port States
•     4. Spanning-Tree Cost Calculation
•     5. Spanning-Tree Portfast
•     6. Rapid PVST
•     7. Rapid PVST Configuration 
• Wireless 
•     1. Introduction to Wireless Networks
•     2. Introduction to Wireless LANs
•     3. Wireless LAN 802.11 Service Sets
•     4. Introduction to Wireless Security
•     5. Wireless Authentication Methods
•     6. Wireless Encryption and Integrity
•     7. Wi-Fi Protected Access (WPA)
•     8. Cisco Wireless Network Architectures
•     9. Cisco WLC Deployment Models
•     10. Cisco Wireless AP Modes
•     11. Cisco Wireless LAN Controller (WLC) Basic Configuration
•     12. Cisco WLC WPA2 PSK Authentication   
• UNIT-3 IP CONNECTIVITY 
• Introduction 
•     1. Introduction to Routers and Routing
•     2. Cisco IOS Router Basic Configuration
•     3. Introduction to Wide Area Networks (WAN) 
• IPv4 Subnetting
•  
•     1. Introduction to Subnetting
•     2. Basics of Binary Numbers
•     3. Subnetting in Binary
•     4. Subnetting in Decimal (Fast Method)
•     5. Classless Inter-Domain Routing (CIDR)
•     6. Variable Length Subnet Mask (VLSM)
•     7. Route Summarization
•     8. Hexadecimal to Binary and Decimal Conversion
•     9. Create a Subnetting Cheat Sheet 
• IPv6 
•     1. Introduction to IPv6
•     2. Shortening IPv6 Addresses
•     3. How to find IPv6 Prefix
•     4. IPv6 Address Types
•     5. IPv6 Address Assignment Example
•     6. IPv6 EUI-64
•     7. IPv6 Summarization
•     8. IPv6 Solicited Node Multicast Address
•     9. IPv6 Neighbor Discovery Protocol (NDP)
•     10. IPv6 Stateless Autoconfiguration 
• Routing 
•     1. Default Gateway
•     2. Static Routing
•     3. IPv6 Static Route
•     4. IP Routing Explained
•     5. Router on a Stick
•     6. InterVLAN Routing
•     7. Administrative Distance
•     8. Floating Static Route
•     9. Introduction to Route Summarization 
• OSPF (OPEN SHORTEST PATH FIRST)
•     1. Introduction to OSPF
•     2. OSPF Configuration
•     3. OSPF Packets and Neighbor Discovery
•     4. OSPF Reference Bandwidth
•     5. OSPF Router ID
•     6. OSPF DR/BDR Election
•     7. OSPF Passive Interface
•     8. OSPF Hello and Dead Interval