In this section the trainee will learn the pre-shift requirements for a Mobile Elevated Work Platform, safe work procedures, emergency procedures and will be introduced to the variety of types of Aerial Work Platforms.
Aerial Work Platform Training Program is designed to introduce both experienced and inexperienced A. W. P. operators to the principles and practices critical to the safe and efficient operation of a Mobile Elevated Work Platform (MEWP) and ensures operators are able to apply safe and correct operating procedures in the work environment.
Our experience has shown that operator safety training is most effective when the information presented is consistent with the policies and procedures followed in the workplace.
Our SAFETY THROUGH MOTION approach teaches trainees of the pre-shift requirements and safe procedures to operate a Mobile Elevated Work Platform such as a Scissor Lift and Genie Boom.
In this section the trainee will learn the pre-shift requirements for a Mobile Elevated Work Platform, safe work procedures, emergency procedures and will be introduced to the variety of types of Aerial Work Platforms.
In this section the trainee will become familiar with the standards and regulations associated with Mobile Elevated Work Platforms. This section also consists of the Fall Protection requirements as stated within the OHSA, CSA and ANSI regulations.
In this section the trainee will become aware of potential accidents and hazards associated with operation of a Mobile Elevated Work Platform.
In this section the trainee will be shown the safe methods of operating an Aerial Work Platform and review all safety concerns and practices.
After completion of the theory portion the trainee will be given a theory test followed by a practical hands-on training and testing of the Aerial Work Platform (AWP) or Mobile Elevated Work Platform (MEWP).
Our instructors have trained over 6500 employees and conducted over 1500 training classes including: forklift operator certification, aerial work platform certification, working at heights designation, fall protection certification, transportation of dangerous goods certification,
WHMIS 2015 (GHS) designation, overhead crane certification, accessibility certification, train the trainer certification, truck mounted crane certification and battery/propane handling instruction.
We carry the designation of factory trained by Raymond Corporation, Skyjack Inc, Working at Heights approved by the Chief Prevention Officer and WHMIS 2015.
We currently have 4 trainers with over 17 years experience in the material handling industry whom have trained on all class of forklift trucks for the distribution centre such as SCM “Wal-Mart Distribution Centre”, TDL “ Tim Horton’s Distribution Centre”, etc.
The BRight Group offers a practical training solution for investigating workplace accidents, with emphasis on how to determine what caused the accident. This (3) hour classroom training is suitable for managers, supervisors and jobsite foremens.
Employers must ensure workers on construction projects complete a working at heights training program approved by the Ontario Ministry of Labour before a worker uses a fall restricting system, fall arrest system, safety net, work belt or safety belt.
Would you stick your hand into a machine and hope no one turns it on? You can guarantee the machine stays off by locking and tagging it out. Failure to lock out machinery before servicing it is a major cause of injury and death.
This course is designed specifically for non-electrical workers who typically use, apply and/or operate electrical equipment in the workplace or work in close proximity to overhead power lines.
Skid steer safety training and certification is offered at Advantage Learning Solutions for operators of all skill-levels, from a novice to someone in need of recertification.
© 2024 coursetakers.com All Rights Reserved. Terms and Conditions of use | Privacy Policy