Cisco Certified Network Associate (CCNA-R&S)200-301

Cisco Certified Network Associate (CCNA) is the associate level Certification in Networking offered by Cisco. CCNA in Routing and Switching covers basics of Cisco Networking and routing switching technologies along with IP addressing schemes, routing basics, switching and WAN technologies. 

After completion of CCNA course, a candidate can easily install, configure and troubleshoot Cisco Routers and Switches for medium sized networks. After completion of CCNA R&S V3.0 200-301 Certification candidates can go for higher level of Cisco Courses like CCNP R&S and CCIE.

The Cisco Certified Network Associate (CCNA) Routing and Switching composite exam (200-125) is a 90-minute, 50–60 question assessment that is associated with the CCNA Routing and Switching certification.

This exam tests a candidate's knowledge and skills related to network fundamentals, LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, infrastructure security, and infrastructure management.

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Course Outline:

• 15% 1.0 Network Fundamentals
• 1.1 Compare And Contrast OSI And TCP/IP Models
• 1.2 Compare And Contrast TCP And UDP Protocols
• 1.3 Describe The Impact Of Infrastructure Components In An Enterprise Network
• Firewalls
• Access Points
• Wireless Controllers
• 1.4 Describe The Effects Of Cloud Resources On Enterprise Network Architecture
• Traffic Path To Internal And External Cloud Services
• Virtual Services
• Basic Virtual Network Infrastructure
• 1.5 Compare And Contrast Collapsed Core And Three-Tier Architectures
• 1.6 Compare And Contrast Network Topologies
• Star
• Mesh
• Hybrid
• 1.7 Select The Appropriate Cabling Type Based On Implementation Requirements
• 1.8 Apply Troubleshooting Methodologies To Resolve Problems
• Perform And Document Fault Isolation
• Resolve Or Escalate
• Verify And Monitor Resolution
• 1.9 Configure, Verify, And Troubleshoot IPv4 Addressing And Subnetting
• 1.10 Compare And Contrast IPv4 Address Type
• Unicast
• Broadcast
• Multicast
• 1.11 Describe The Need For Private IPv4 Addressing
• 1.12 Identify The Appropriate IPv6 Addressing Scheme To Satisfy Addressing Requirements In A LAN/WAN Environment
• 1.13 Configure, Verify, And Troubleshoot IPv6 Addressing
• 1.14 Configure And Verify IPv6 Stateless Address Auto Configuration
• 1.15 Compare And Contrast IPv6 Address Types
• Global Unicast
• Unique Local
• Link Local
• Multicast
• Modified EUI 64
• Autoconfiguration
• Anycast
• 21% 2.0 LAN Switching Technologies
• 2.1 Describe And Verify Switching Concepts
• MAC Learning And Aging
• Frame Switching
• Frame Flooding
• MAC Address Table
• 2.2 Interpret Ethernet Frame Format
• 2.3 Troubleshoot Interface And Cable Issues (Collisions, Errors, Duplex, Speed)
• 2.4 Configure, Verify, And Troubleshoot VLANs (Normal/Extended Range) Spanning Multiple Switches
• Access Ports (Data And Voice)
• Default VLAN
• 2.5 Configure, Verify, And Troubleshoot Interswitch Connectivity
• Trunk Ports
• Add And Remove VLANs On A Trunk
• DTP, VTP (V1&V2), And 802.1Q
• Native VLAN
• 2.6 Configure, Verify, And Troubleshoot STP Protocols
• STP Mode (PVST+ And RPVST+)
• STP Root Bridge Selection
• 2.7 Configure, Verify And Troubleshoot STP Related Optional Features
• PortFast
• BPDU Guard
• 2.8 Configure And Verify Layer 2 Protocols
• Cisco Discovery Protocol
• LLDP
• 2.9 Configure, Verify, And Troubleshoot (Layer 2/Layer 3) EtherChannel
• Static
• PAGP
• LACP
• 2.10 Describe The Benefits Of Switch Stacking And Chassis Aggregation
• 23% 3.0 Routing Technologies
• 3.1 Describe The Routing Concepts
• Packet Handling Along The Path Through A Network
• Forwarding Decision Based On Route Lookup
• Frame Rewrite
• 3.2 Interpret The Components Of A Routing Table
• Prefix
• Network Mask
• Next Hop
• Routing Protocol Code
• Administrative Distance
• Metric
• Gateway Of Last Resort
• 3.3 Describe How A Routing Table Is Populated By Different Routing Information Sources Admin Distance
• 3.4 Configure, Verify, And Troubleshoot Inter-VLAN Routing
• Router On A Stick
• SVI
• 3.5 Compare And Contrast Static Routing And Dynamic Routing
• 3.6 Compare And Contrast Distance Vector And Link State Routing Protocols
• 3.7 Compare And Contrast Interior And Exterior Routing Protocols
• 3.8 Configure, Verify, And Troubleshoot IPv4 And IPv6 Static Routing
• Default Route
• Network Rout
• Host Route
• Floating Static
• 3.9 Configure, Verify, And Troubleshoot Single Area And Multi-Area OSPFv2 For IPv4 (Excluding Authentication, Filtering, Manual Summarization, Redistribution, Stub, Virtual-Link, And LSAs)
• 3.10 Configure, Verify, And Troubleshoot Single Area And Multi-Area OSPFv3 For IPv6 (Excluding Authentication, Filtering, Manual Summarization, Redistribution, Stub, Virtual-Link, And LSAs)
• 3.11 Configure, Verify, And Troubleshoot EIGRP For IPv4 (Excluding Authentication, Filtering, Manual Summarization, Redistribution, Stub)
• 3.12 Configure, Verify, And Troubleshoot EIGRP For IPv6 (Excluding Authentication, Filtering, Manual Summarization, Redistribution, Stub)
• 3.13 Configure, Verify, And Troubleshoot RIPv2 For IPv4 (Excluding Authentication, Filtering, Manual Summarization, Redistribution)
• 3.14 Troubleshoot Basic Layer 3 End-To-End Connectivity Issues
• 21% 4.0 WAN Technologies
• 4.1 Configure And Verify PPP And MLPPP On WAN Interfaces Using Local Authentication
• 4.2 Configure, Verify, And Troubleshoot PPPoE Client-Side Interfaces Using Local Authentication
• 4.3 Configure, Verify, And Troubleshoot GRE Tunnel Connectivity
• 4.4 Describe WAN Topology Options
• Point-To-Point
• Hub And Spoke
• Full Mesh
• Single Vs Dual-Homed
• 4.5 Describe WAN Access Connectivity Options
• MPLS
• Metro Ethernet
• Broadband PPPoE
• Internet VPN (DMVPN, Site-To-Site VPN, Client VPN)
• 4.6 Configure And Verify Single-Homed Branch Connectivity Using EBGP IPv4 (Limited To Peering And Route Advertisement Using Network Command Only)
• 4.7 Describe Basic QoS Concepts
• Marking
• Device Trust
•  Prioritization
•  4.7.C. (I) Voice
•  4.7.C. (Ii) Video
•  4.7.C. (Iii) Data
•  Shaping
•  Policing
•  Congestion Management
• 10% 5.0 Infrastructure Services
• 5.1 Describe DNS Lookup Operation
• 5.2 Troubleshoot Client Connectivity Issues Involving DNS
• 5.3 Configure And Verify DHCP On A Router (Excluding Static Reservations)
•  Server
•  Relay
•  Client
•  TFTP, DNS, And Gateway Options
• 5.4 Troubleshoot Client- And Router-Based DHCP Connectivity Issues
• 5.5 Configure, Verify, And Troubleshoot Basic HSRP
•  Priority
•  Preemption
•  Version
• 5.6 Configure, Verify, And Troubleshoot Inside Source NAT
•  Static
•  Pool
•  PAT
• 5.7 Configure And Verify NTP Operating In A Client/Server Mode
• 11% 6.0 Infrastructure Security
• And more.