The Safety Through Motion – Lift Truck Operator Training Program is designed to introduce both experienced and inexperienced lift truck operators to the principles and practices critical to the safe and efficient operation of a lift truck and ensures operators are able to apply safe and correct oper
The Safety Through Motion – Lift Truck Operator Training Program is designed to introduce both experienced and inexperienced lift truck operators to the principles and practices critical to the safe and efficient operation of a lift truck and ensures operators are able to apply safe and correct operating procedures in the work environment.
Our experience has shown that operator safety training is most effective when the information presented is consistent with the policies and procedures followed in the workplace. Every organization manages their materials handling operation in a unique way.
The time required to deliver the Safety Through Motion Operator Safety Training Program varies according to the number of lift truck models to be covered and the characteristics of the operating environment. The program will be conducted from a minimum of 4 hours to a maximum of 8 hours as outlined in CSA Standard B335-15.
A maximum of 12 operators per session ensures each participant is given the time to understand and retain the information presented. We also recommend one or two front-line supervisors attend the session and provide coaching and reinforcement of the programs principles and practices to operators on the job.
To enhance learning and the transfer of good safety habits to the workplace, the six program modules are structured to be user-friendly, informative and highly interactive. To facilitate the learning process during training and provide additional support to the operator once they return to the workplace.
The Safety Through Motion Lift Truck Operator programs are conducted in your facility To facilitate discussion and the display and viewing of presentation materials and ensure the comfort of participants.
Modules One through Six are conducted training room setting. Should you choose to conduct the training at your facility, but are unable to provide the required audio-visual equipment, we will provide the necessary equipment at no additional charge.
Following the successful completion of Program #1 and the hands-on Testing/Evaluation in Program #3, each operator receives a Training Certificate and laminated wallet card in recognition of their achievement.
A brief description of our Lift Truck SSafety Thrugh Motion program modules follows
Module #1 Safety First
This module provides the foundation for the Safety Through Motion training program and helps to motivate students to learn and follow safety procedures.
To initiate discussion of general operator safety practices, current occupational health and safety legislation, regulations, guidelines, standards and other issues relating to accidents and injuries in the workplace are presented.
Module #2 The Operator Checklist
The beginning of each day in a safe operator’s career begins with a truck safety inspection. In this module, safety apparel, visual truck inspection and operational checks are discussed and illustrated with a video segment and the Safety Through Motion- Operator Checklist.
Module #3 Lift Truck Travel
This module is designed to focus the operator’s attention on safe travel procedures in their workplace. The designated operating position and the proper operation of a truck when travelling, stopping or changing direction are presented through discussion and video illustration.
Module #4 Load Handling
Several materials handling concepts critical to safe operation are covered in this module including; centre of gravity, centrifugal force, momentum, load centre, load capacity and the vehicle specification plate.
Operators learn how these concepts apply to materials handling, the problems that may be encountered in load handling and how these problems can be avoided.
Module #5 Ramps and Loading Docks
This module identifies the safe handling of a lift truck on a ramp or loading dock and explores the consequences of unsafe handling practices.
Module #6 Batteries
Batteries require special handling to avoid injury and accidents. This module is designed to demonstrate the impact batteries have on the overall safe operation of the vehicle.
Theory Evaluation
This portion of the SAFETY THROUGH MOTION program concludes with a review of the information presented through individual completion of multiple choice questionnaires. Participants able to answer 21 of the 25 questions correctly are considered to have understood and retained the information presented in the program.
Should participants answer fewer than 21 questions correctly, their incorrect responses are reviewed with them immediately following the completion and scoring of the test.
Safety Through Motion – Lift Truck Practical Learning/Evaluation
Operator hands-on learning and evaluation is conducted at your facility, in the operator’s normal work environment using the equipment the operator is required to operate.
This program is designed to teach the inexperienced or novice operator the skills needed to drive a lift truck safely on the job. Hands-on operator instruction is also applicable for experienced operators operating equipment in new or unfamiliar applications or operating new models or truck types.
Module specific videos are used to introduce the operator to the truck they will be driving. On- site demonstration and practice on the truck combined with ongoing feedback from the trainer help the student to master the necessary safe operating skills and techniques.
The length of the instructional time will vary from person to person depending on past experience, ability to adapt, type and variety of equipment. Prior completion of modules 1 through 6 of the Safety Thrugh Motion program is a prerequisite to the hands-on instruction program.
Operator Testing And Evaluation
Hands-on operator testing consists of a ½ hour one-on-one evaluation of the operators in their work environment. Using the truck type and model they are required to operate on the job, each operator is tested on their application of the safety principles and practices outlined in the Safety Thrugh Motion program.
In addition to the individual feedback offered to operator’s following the evaluation a written appraisal of each operator is also prepared.
Operator testing and evaluation is usually conducted in the days following the completion of modules one through six of the Safety Thrugh Motion Program.
Allowing operators this opportunity to apply and practice the safety principles and practices learned in Modules One through Six in the workplace prior to testing, not only ensures compliance with safety regulations and standards it also improves their test results and encourages the transfer of good safety habits to the workplace.
Following the successful completion of Program #1 and the hands-on Testing/Evaluation, each operator receives a Training Certificate and laminated wallet card in recognition of their achievement.
This Forklift Training course is designed using parameters set out by:
CSA Standard B335-15 – The CSA Safety Standard for Lift Trucks (B335-15) identifies the knowledge, practical skills and evaluation requirements needed by lift truck operators. The practical evaluation of the forklift operator training course requires operators to demonstrate competency skill level equal or greater to the industry accepted measurements.
The Occupational Health and Safety Act, REGULATION 851. INDUSTRIAL ESTABLISHMENTS as it pertains to lift truck safety.
We are dedicated to establishing a true partnership in safety prevention with our customers, while offering exemplary customer service and training that will exceed our customer’s expectations.
We are committed to ensuring your due diligence is achieved beyond any reasonable doubt, resulting in a SAFE work environment and the protection of the health and safety of all employees.
The importance of safety in the workplace is highly important and valued.. With new Standards and amended Regulations we understand the challenges to achieve safety compliance.
We also aware that you want to provide the best training experience to yourself and your employees. Training that will educate, motivate and empower your staff.
We help by providing an engaging, friendly, instructor-led safety training. Our versatility allows us to assist different trades and businesses with customized solutions.
It is training that you will feel good about, and training that will generate positive benefits and results. Such as; increase in productivity, and efficiency, reduction in avoidable damages and lost time.
Our instructors have trained over 6500 employees and conducted over 1500 training classes including: forklift operator certification, aerial work platform certification, working at heights designation, fall protection certification, transportation of dangerous goods certification,
WHMIS 2015 (GHS) designation, overhead crane certification, accessibility certification, train the trainer certification, truck mounted crane certification and battery/propane handling instruction.
We carry the designation of factory trained by Raymond Corporation, Skyjack Inc, Working at Heights approved by the Chief Prevention Officer and WHMIS 2015.
We currently have 4 trainers with over 17 years experience in the material handling industry whom have trained on all class of forklift trucks for the distribution centre such as SCM “Wal-Mart Distribution Centre”, TDL “ Tim Horton’s Distribution Centre”, etc.
The course focuses on self-propelled elevated work platforms (scissor lifts) and self-propelled boom supported elevated work platforms (boom lifts).
Upon completion of this program, participants will be able to identify and fight off behavioural-based management approaches and establish real prevention programs that identify, assess and control hazards. No Expiry.
Working At Heights Training course is offered Davis Trainincentre. Davis Training is pleased to offer Master Safety’s Working at Heights Training Programs – CPO approved (WAH-35084).
This full-day program is designed for workers in the Ontario construction industry and covers all of the required training under Ontario Regulation 213/91 (Construction Projects).
The goal of this course is to enable learners to identify the basic types of aerial and scissor lifts and the hazards associated with their use, as well as their inspection criteria, and safe work practices associated with aerial lift operation.
© 2024 coursetakers.com All Rights Reserved. Terms and Conditions of use | Privacy Policy