The aim of the course is to make the trainee to understand supervision skills of marine metal scaffold erections.
DurationThe aim of the course is to make the trainee to understand supervision skills of marine metal scaffold erections.
Learning Objective
The objective of this training course is to enable participants to:
Introduction to Marine Metal Scaffolding
Roles and Responsibilities of a Marine Metal Supervisor
Composition of Scaffold
Scaffolding system; details, types and uses of scaffolds
Handling of scaffold materials
Ship structures – names and parts
WSH (Scaffolds) Regulations 2011, WSH (Work-At-Height) Regulations 2014, WSH (Work-At-Height) Regulations Amendment 2014, CP14:1996, CP20:1999
Stability, centre of gravity and loading of scaffolds
Drawings/sketches of various types of scaffolds
Erecting hanging scaffolds – procedures, methods, anchoring points, safety precautions
General guidelines to alter, modify, add, inspect, assessment of scaffold
Developing scaffold checklist
Scaffolding safety
Design, Erect, Inspect and Dismantle of a typical marine metal scaffold
Entry Requirements
The trainees should pass the Marine Metal Scaffold Course for Scaffolders. Proof of entry requirement includes the submission of Certificate of Successful Completion or WSQ Certificate of Attainment (SOA)
Employability Skills (ES) Workplace Literacy level 4 and above. Be able to manipulate numbers at a proficiency level equivalent to ES Workplace Numeracy level 4 and above.
Validity Of Certificate
The certificate and ID card that is issued to a successful participant for the course and assessment is valid for life long.
Based on the successful completion of the course and assessment, a certificate of achievement endorsed by SkillsFuture Singapore (SSG) will, will be awarded to the trainee.
Course Syllabus
Introduction to Marine Metal Scaffolding,
Damaged and Defective Materials,
Tie-backs and Bracing,
Interpretation of Marine Metal Scaffolding Working Drawings
Typical scaffolds for corrugated bulkheads
Safety Rules in erecting and dismantling of scaffolds
Marine Scaffold Accidents
Sound Metal Scaffolds
Requirements for Outriggers
Methods and Procedures for Erection and Dismantling,
Precautions to be taken while working in confined spaces and at height
Introduction to Hanging Scaffold
Maintaining Scaffolds, Altering Scaffolds
Scaffold Checklist .
Practical Class
Written Assessment
Practical Assessment
DV TRAINING SERVICES PTE. LTD. was established on October 2010. We are providing Environmental, Safety & Health Training and Consultancy Services.
DVTS understands that in Singapore Safety has given prime importance in all workplaces.
So Safety is essential and basic for each and every outdoor as well as indoor workers working in the industries such as Shipyard, Construction, Metal work & Oil and Petrochemical industries.
We are providing high quality of training in accordance with Singapore Ministry of Manpower standards.
DV Training Sevices PTE. LTD. is providing effective and quality of training through constant up gradation of information, technology and processes. DVTS provides mandatory WSH training courses for local and foreign workers.
At the end of the course, the participants should be able to recognize the safety & health hazards in work place, know the preventive measures to be adopted, and the importance of observing safety signs and safe work procedures. Also our aim is to educate workers on their rights and responsibilities.
DVTS is empowering each employee to be proactive in supporting continuous improvement. Management will work together with our employees to improve organizations Quality Management System.
DV Training Services Pte. Ltd always tries to beyond our commitments. DV Training Services Pte. Ltd. has developed and implemented a quality management system in order to document the company’s best business practices, better satisfy the requirements and expectations of its customers and to improve the overall management of the company.
The quality management system of DV Training Services Pte. Ltd. meets the requirements of the international standard ISO 29990:2010.
This system addresses the design, development, production, installation and servicing of the company’s products.
We got the ISO 29990:2010 for the learning services provider for non formal education with SAC at January 2015.
This manual describes the quality management system, delineates authorities, inter relationships and responsibilities of personnel responsible for performing within the system.
The manual also provides procedures or references for all activities comprising the quality management system to ensure compliance to the necessary requirements of the standard.
This manual is also used externally to introduce our quality management system to our customers and other external organizations or individuals.
The manual is used to familiarize them with the controls that have been implemented and to assure them that the integrity of our quality management system is maintained and focused on customer satisfaction and continuous improvement.
Overall as of December 2018 we trained more than 1, 25,000 students
DV Training Services Pte Ltd conducting the Ministry of Manpower and SAC approved Accredited Training Provider for Shipyard industry, Construction industry, Oil & petrochemical industry & Metalwork industry.
DV Training Services Pte Ltd conducting the Ministry of Manpower and SAC approved Accredited Training Provider for Shipyard industry, Construction industry, Oil & petrochemical industry & Metalwork industry.
Type of industrial training providing:
Workers level courses, Supervisors level courses, Manager level courses & Professional level courses
Welding training
Welding training for 3G, 4G, 6G in the process of SMAW, GTAW, SMAW + GTAW.
Customaries Training
We are providing all kind of customaries course such as Work at heights related, Scaffolding related courses, and other theory class and practical class for worker, supervisor, manager & professional level courses as per the customer requirement.
Course aims to equip participants with knowledge and skills on responding safely to incidents involving chemical spillage.
This course fulfils this objective by teaching students how to apply knowledge of anatomy, physiology and biomechanics in assessing and designing jobs and workplaces to fit the operators’ needs and requirements.
This Competency Unit aims to provide learners with the knowledge and skills in performing work at height in construction and other industry sectors. On completion of this unit, learners will have knowledge and skills in performing work at height in construction and other industry sectors.
Under the Workplace Safety and Health (WSH) 2006 Act, all persons who perform metal scaffold erection in the building and construction industry must take the metal scaffold erector course and be certified to ensure safety on the job.
Supervising Safe Lifting Operations course is aimed at providing participants with the knowledge and skills to supervise safe lifting operations involving a mobile crane or tower crane or any other crane in the workplace.
About Coursetakers.com
Coursetakers.com is more than a decade old course aggregator and Online course platform that helps students find courses and compare course prices from Training providers in the UAE, UK, USA, India and South Africa, by just submitting their inquiry through the website. Coursetakers also helps Institutes, Universities and Online Instructors market their courses, gain leads and get more students to enroll into their courses.
© 2024 coursetakers.com All Rights Reserved. Terms and Conditions of use | Privacy Policy
Online
USA
UK
India
UAE
South Africa
Canada
New Zealand
Australia
Malaysia
Singapore
Saudi Arabia
Egypt
Jordan