Forklifts are used in many types of industries, ensure your compliance or boost your opportunities or and get your forklift licence. Doesn’t matter if you have never been on one before, or have used one for many years, you are legally required to hold a high risk work license to drive one.
Forklifts are used in many types of industries, ensure your compliance or boost your opportunities or and get your forklift licence. Doesn’t matter if you have never been on one before, or have used one for many years, you are legally required to hold a high risk work license to drive one.
Who can enrol in this qualification
A Forklift truck is a powered industrial truck equipped with lifting media made up of a mast and an elevating load carriage to which is attached a pair of fork arms or other attachments that can be raised 900 mm or more above the ground, but does not include a pedestrian operated truck or a pallet truck.
Suitability Requirements
A Pre-training review is conducted prior to enrolment as it is essential that students being MUST be able to read write and speak English to successfully complete this training and licence. All persons MUST be a minimum 18 years of age.
What do I need to enrol?
A USI*, 100points of Identification(The combination of documents presented to the accredited assessor must include your date of birth, current residential address, photograph and signature):
Birth Certificate or Passport (70Points each)
Current Australian driver’s or boat licence (40Points)
Current state/territory proof of age,photocard, Defence ID
(40Points)
Current Medicare card, Centrelink, Credit Cards(25Points each) A full list available on request.
What do I need to bring to training?
2 Black pens, High Vis Top, Safety boots
Cost
Cost is $495 per person, with a retest fee of $200 if student does not successfully pass the assessment. Cost for Weekend ONLY (SATURDAYS) is $550 per person.
Licensing & Regulatory Requirements
Forklift licensing is issued by each state and territory Health and Safety Regulator. Once you have achieved the licence you can drive in all states and territories.
Specific licensing /regulatory requirements relating to this competency, including requirements for refresher training should be obtained from the relevant national/state/territory Work Health and Safety Regulatory Authorities: Safework NSW, Worksafe VIC, Worksafe QLD, Safework SA, WorkSafe WA, Worksafe TAS, NT Worksafe, Worksafe ACT.
Delivery
We highly recommend 3 days of training, assessment and licensing. Highly experience and competent drivers who require licensing may apply for shorter training times. This May be facilitated at a customer’s site or one of our Training Centers – Please call to inquire.
Assessment
Assessment is conducted by the below methods:
Theory questions
Practical set up, Forklift inspection & Driving instruction
Closed book – Theory & calculations test and driving test.
Completion
On successful completion participants will be issued with a Statement of Attainment with the following units:
TLILIC0003 Licence to operate a forklift truck and Your State Regulators Notice of Assessment(Valid for 60 days only)
Established in 1999, Executive Training Group (ETG) is a Registered Training Organisation offering training in Security Operations, Aviation Transport Protection, Hospitality, Work, Health & Safety Victoria, Transport & Logistics. Executive Training Group has been providing nationally recognised training for licensing and non licensing outcomes for 18 years.
The company is also accredited with the NSW & Victorian Police, Safework NSW, Worksafe Victoria, VCGLR and the NSW Liquor & Gaming, Risk Management institute of Australia, Security Trainers Association and is a member of ASIAL.
This Course covers all aspects of safe access to heights legislative requirements the selection, use and maintenance of Personal Protective Equipment. There is both a theory and a practical component to this course.
A PCBU must ensure workers who they reasonably believe may be involved in asbestos removal work in the workplace or the carrying out of asbestos-related work are trained in the identification, safe handling and suitable control measures for asbestos and ACM.
This course will teach participants the skills and knowledge needed to to work in accordance with a permit which has been issued. It aims to ensure that people working under a permit to work understand the system, know the limitations of the permit under which they are working and comply with all t...
This three day program is designed to provide knowledge and practical skills for the safe removal of friable asbestos containing material (ACM).
The aim of this course is to encourage the adoption of safe practices whilst working at heights and provides instruction in the correct use of access and safety equipment. This course does not provide detailed training on the erection of scaffolding.
© 2025 coursetakers.com All Rights Reserved. Terms and Conditions of use | Privacy Policy