The program is intended for workers, supervisors, and employers who are responsible for the safety of those who work at heights in construction.
Ontario's CPO-approved Working at Heights training program is a comprehensive safety training course designed to prevent falls from heights in the workplace. The program is intended for workers, supervisors, and employers who are responsible for the safety of those who work at heights in construction.
Construction Regulation 213/91 requires anyone working at heights to have received training from a CPO-approved training provider. The regulation applies to all construction projects, including new construction, renovation, and demolition projects.
The course covers the following topics:
??Rights and Responsibilities: Participants will learn about their rights and responsibilities under the Occupational Health and Safety Act (OHSA) and its regulations. Workers have the right to a safe work environment, and employers have a legal duty to ensure that workers are protected from workplace hazards. Supervisors play a key role in ensuring that workers are properly trained and equipped to work safely at heights. Workers must also follow safe work practices, use the proper equipment, and report any hazards or safety concerns to their supervisor. The role of the Ministry of Labour, Immigration, Training and Skills Development is also discussed.
Identification of the Hazards of Working at Heights: Participants will learn how to identify the hazards associated with working at heights. Hazards may include uneven or unstable surfaces, unprotected edges or openings, and the risk of falling objects. Participants will learn how to identify these hazards and assess the risks associated with them. They will also learn how to develop a fall protection plan to mitigate these risks.
Eliminating or Controlling the Hazards of Working at Heights: Once the hazards of working at heights have been identified, participants will learn how to eliminate or control those hazards. This may involve implementing engineering controls such as guardrails, nets, or covers, or administrative controls such as work procedures and training. Participants will learn how to determine the appropriate control measures for each hazard and how to ensure that these measures are effective in preventing falls.
Ladders and Similar Equipment: The safe use of ladders and similar equipment is also covered in the Working at Heights program. Participants will learn about the different types of ladders and how to select the appropriate ladder for the job. They will also learn about ladder safety, including how to inspect and maintain ladders, and how to use ladders safely.
Warning Methods and Physical Barriers: Warning methods and physical barriers are also covered in the Working at Heights program. Participants will learn about the importance of using warning methods, such as signs and signals, to alert workers to potential hazards. They will also learn about the use of physical barriers, such as guardrails and safety nets, to prevent falls and protect workers.
Personal Fall Protection: Participants will learn to explain the circumstances that require a travel restraint, fall restricting or fall arresting system, describe the essential components of each system, and recognize that more extensive training is necessary to use these systems safely and effectively.
Barriers and Other Fixed Equipment: Participants will learn about fixed barriers and other equipment used to prevent falls from heights. This may include guardrails, safety nets, floor covers, and other engineering controls designed to provide a physical barrier between workers and hazards.
Personal Fall Protection Equipment: Personal fall protection equipment is a key component of the Working at Heights program. Participants will learn about different types of personal fall protection equipment, including harnesses, lanyards, and self-retracting lifelines. They will learn how to select and use the appropriate equipment for the job, as well as how to properly inspect and maintain this equipment. The importance of maintaining 100% tie off is also thoroughly reviewed.
Anchor Points: Anchor points are critical to the effective use of personal fall protection equipment. Participants will learn about the different types of anchor points, including fixed and temporary anchor points. They will also learn how to select and use the appropriate anchor point for the job, as well as how to properly inspect and maintain anchor points.
Work Access Equipment and Platforms: Work access equipment and platforms are often used to provide safe access to elevated work areas. Participants will learn about the different types of work access equipment and platforms, with a primary focus on aerial work platforms such as scissor lifts and boom lifts. They will learn how to select and use the appropriate equipment for the job, as well as how to properly tie off.
Rescue Planning: Participants will learn about the importance of having a rescue plan in place in the event of a fall from heights. This includes identifying the appropriate rescue equipment and personnel, establishing communication protocols, and developing emergency response procedures. Participants will learn how to assess the risks associated with falls and how to develop a rescue plan that ensures a timely and effective response.
Throughout the course, participants will have the opportunity to practice and demonstrate their understanding of the material through hands-on exercises, case studies and assessments. Upon completion of the course, participants will receive a certificate of completion and will be equipped with the knowledge and skills needed to work safely at heights.
?
?Regulatory References
?Occupational Health & Safety Act
Ontario Regulation 213/91 Construction Projects
Ontario Regulation 851 Industrial Establishments
Course Content
Rights and Responsibilities
Recognizing Hazards
The Hierarchy of Controls
Safe Work Plans
Proper Ladder Use
Inspection and Care
Warning Methods and Physical Barriers
Fall Protection Systems
Calculating Fall Clearance Distances
Equipment Inspection
Equipment Donning and Doffing
Maintaining 100% Tie-off
Anchor Points
Working on an Aerial Work Platform
Rescue Planning
Since 1995, FSN Safety Training has been providing customers with exceptional services that give people the tools to identify workplace hazards, be competent and do their job safely. Offering a wide range of safety programs, we give our customers the benefit of learning on-site in their environment.
Students receive a book with theory and guidelines for competent operation of a Elevated Work Platform. Scissor Lifts and Aerial Boom Lifts are covered. Students will learn the importance of performing a pre-start inspection Identify problems affecting the safe operation of the AWP.
The student should have an awareness of the various legislation, regulations, and standards that pertain to powered mobile equipment. The student should understand the roles and responsibilities of employers and employees as they relate to the operation of PME.
Under the Occupational Health & Safety Act, employers are required to ensure that workers have been trained and are aware of any hazard in the workplace.
During this training, employees will learn how to properly evaluate a load in order to lift it and move it safely. They will study how to calculate angles and the different attaching techniques according to their number.
The goal of this course is to provide participants with the knowledge and skills necessary to have a better understanding of the principles of auditing, the auditing process, the audit review.Â
© 2024 coursetakers.com All Rights Reserved. Terms and Conditions of use | Privacy Policy