COURSES OFFERED BY AMERICAN SAFETY SERVICES INC

4 Hours of instruction that include classroom, testing, and hands-on evaluation. In compliance with, and required by OSHA 1910.67 and ANSI 92.5 standards.

Required by OSHA 1910.157 and NFPA, this classroom and hands-on class on fire extinguishers is required annually. If your employee has a fire extinguisher, they must take this class in order to operate it while they are working.

5 Hours of classroom instruction and testing with hands-on evaluation in heavy equipment (skidsteer, backhoe, trackhoe, etc.). Satisfies requirements under 29 CFR 1926.28.

This class will give your employees the needed awareness and hands on training to be able to keep themselves safe and protected. From identification of fall hazards to the use, selection, and inspection of Fall Arrest Systems

4 Hours of instruction that include classroom, testing, and hands-on evaluation. In compliance with and required by OSHA 29 CFR 1910.67 and ANSI h standards.

This 1 hour class is required annually and teaches employees the basic hazards associated with Hydrogen Sulfide. Required by all operators in the Permian basin, this minimum awareness only class satisfies OSHA 29 CFR 1910.1200, and Texas Railroad Commission Rule 36.

This class is compliant with 1910.252 and will teach employees how to recognize hazards that could create flammable or combustible environments. Atmospheric monitoring, correct permit writing, and the regulations for working around potentially flammable sources will all be learned.

This class is compliant with 1910.252 and will teach employees how to recognize hazards that could create flammable or combustible environments. Atmospheric monitoring, correct permit writing, and the regulations for working around potentially flammable sources will all be learned.

Employees will learn the hazards associated with energy isolation, how to properly perform Lockout Tagout, and how to protect themselves in the work place. This class is required by law for all employees who are involved in Lockout Tagout operations. Satisfies 29 CFR 1910.147.

Under OSHA's Respiratory standard, employees are required to receive training in how to use, inspect, don, doff, and troubleshoot any respirator that they will be using during work to protect themselves from hazards. Satisfies requirement from OSHA 29 CFR 1910.134